- includes removable watertrap to keep excessive moisture away from your reed.
- top section ferrule and bottom section sole available in either plain or engraved imitation ivory or aluminum. Regardless of which material, all ferrules and soles are threaded.
- countersunk finger holes with pipe chanter spacing
- Total Length = 21 3/4"
-The included water trap was designed to fit all Dunbar long (including Millennium and deluxe) practice chanters but unfortunately will not fit into our regular length chanter.
For everyday use, reverse blow through the top section to empty the trap. The moisture will come out through the mouthpiece.
For periodic cleaning, you will need to find something smaller in diameter than the 5/32" bore through the mouthpiece and at least 9" long (we use a piece of 1/8" drill rod, but a straightened out coat hanger will work as well). Push this rod down through the mouthpiece and with some pressure; slide the trap out of the top section. Clean with soap and water and re-install. Make sure that the beveled end goes in first ("O"ring goes in last).
**Very Important - make sure that you slide the trap up into the top section as far as it will go. If it is not seated properly, it will interfere with and damage your reed.